Application List

Equipment
Recommended product
Application Intervals and Method
Blower assembly TS-65 M.P. Moly Grease Apply every 150 hours of operation. Do not over-lubricate.
Exciter Generator Bearings

TS-65 M.P. Moly Grease

Apply every 150 hours of operation. Do not over-lubricate.
AC Generator

TS-65 M.P. Moly Grease

Apply every 150 hours of operation. Do not over-lubricate.
Spud Racks and Pinions

TS-209 O.G.L.
TS-210 SeaSafe™ Leg Dope & Cable Lube

Swab teeth with lubricant during elevation or lowering operation.
Spud Guides and Ways

TS-209 O.G.L.
TS-210 SeaSafe™ Leg Dope & Cable Lube

Swab teeth with lubricant during elevation or lowering operation.
Final Drive In-board Bearings TS-65 M.P. Moly Grease Apply with hand gun during elevation or lowering operation.
Final Drive Out-board Bearings TS-65 M.P. Moly Grease Apply with hand gun during elevation or lowering operation.
Final Drive Gear Teeth

TS-209 O.G.L.
TS-210 SeaSafe™ Leg Dope & Cable Lube
When oil pans are used:
TS-302 Moly SAE 140 Gear Oil

Swab teeth with lubricant during elevation or lowering operation.
Intermediate Out-board Bearings TS-65 M.P. Moly Grease Apply with hand gun during elevation or lowering operation.
Spud Motor Bearings TS-65 M.P. Moly Grease Apply with hand gun every 150 hours of operation, or as needed. Do not over-lubricate.
Intermediate Gear Unit

For SAE 90:
TS-313 Moly 80W90 Gear Oil
TS-301 Moly SAE85W140 Gear Oil
Above 100°F:
TS-302 Moly SAE140 Gear Oil

Apply during elevation or lowering operation. Change at overhaul.
Skidder Ways

TS-65 M.P. Moly Grease
TS-209 O.G.L.
TS-264 SeaSafe® Skid Grease

Apply with hand gun or swab during skidder movement.
Spud Primary Gear Box

For SAE 90:
TS-313 Moly 80W90 Gear Oil
TS-301 Moly SAE85W140 Gear Oil
Above 100°F:
TS-302 Moly SAE140 Gear Oil

Apply prior to elevation or lowering operation.